The ETL listed to UL 458 standards AIMS 3000-Wattatt pure sine inverter charger has surpassed the ETL requirements and includes a 2-year warranty. This inverter is a combination of an inverter, battery charger and AC auto-transfer switch into 1 complete system with a peak DC and AC conversion efficiency of 92%. It is packed with unique features and it is 1 of the most advanced inverter chargers on the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The powerful battery charger is capable of 12-Volt at 100 Amp, and with power factor corrected, it uses 20% to 30% less energy from AC input than a standard charger, avoiding nuisance breaker trips or generator overloads. In response to the increasing demand of more advance battery charging, this model is equipped with Batter Temperature Sensing for increased charging precision. The overloads capacity is 300% of continuous output for up to 20-seconds to reliably support tools and equipment longer. The transformers have been consistently improved for years to achieve the best balance of conversion efficiency, idle consumption and minimum THD. The idle consumption of the line is ultra-low, roughly 1.5% of its rated power.
3000-Watt continuous power
9000-Watt surge power
12-Volt DC input
120-Volt AC output
Pure sine wave
Output Voltage: 100-Volt/110-Volt/120-Volt AC
Nominal efficiency: 92% plus (peak)
Line mode efficiency: 95% plus
Output frequency: 50 Hz plus/minus 0.3Hz / 60 Hz plus/minus 0.3Hz
Typical transfer time: 10 milliseconds (maximum)
Terminal output breaker / transfer load 30 Amp automatic
GFCI breaker: 15 Amp
Low battery alarm: 10.5-Volt DC to 11.0-Volt DC
Low battery trip: 10.0-Volt DC-10.5-Volt DC
Low battery Voltage restart: 13.0-Volt DC
Charger breaker / input 30 Amp
Idle consumption: 55-Watt
Power saver mode idle consumption: less than 21.7-Watt
Comment