DIG 100 ft. 1/2 in. with 0.700 OD dripline is extruded with 1 GPH pressure compensating (PC) drip emitters built into the interior wall of the dripline every 12 in. Each drip emitter continuously adjusts to varying incoming water pressure， ensuring a constant flow rate along the dripline. For commercial and residential applications， install this drip line above the ground and， if desired， cover it with mulch to blend with the landscape. The PC dripline is ideal for plants in preset spacing， narrow plantings and closely spaced plants in rows， as well as for hedges， groundcover， shrubs and roses. For complete coverage of an area， use multiple lines of dripline， placing the lines 16 in. to 24 in. apart. In addition， the dripline can be used around a house foundation to reduce soil movement， cracking and slab damage.

Consists of 100 ft. of 1/2 in. with 0.700 OD pressure compensating (PC) dripline

Discharges 1 GPH per each drip emitter at 10 psi to 45 psi

Use for groundcover， roses， shrubs， plantings in narrow areas or loops around trees

Pressure compensating PC driplines drip emitters deliver equal flow over the length of the dripline

Accepts standard black insert， 0.700 compression fittings， brown barbed fittings or DIG nut lock fittings

Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging

Total of hundred 1 GPH PC drip emitters per 100 ft. of dripline

Can be covered with mulch and may used below or above the ground

DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)

Total flow: 100 GPH (1.66 GPM)

Maximum run length of 202 ft. can be achieved from a single water source at 45 psi

Flexible tubing for easy installation; no special tools or glue are needed

3-year warranty