Lo/MIT attic heat barrier is a coating specially formulated to reduce summer radiant heat gain from the roof into the attic. Lo/MIT is a silver-colored， non-thickness dependent， low emissivity radiant barrier paint (Interior Radiation Control Coating System- IRCCS) which may be used in almost any application where infrared (heat) reflectivity or diffuse light reflectivity is required. Cool your attic and lower utility costs by applying Lo/MIT to the underside of your roof deck and rafters. Easily applied with standard airless paint sprayers， Lo/MIT is the most economical way to install radiant heat barrier technology in your home.

Cools attics， saves up to 15% or more on A/C bills

Increase comfort in attic and home， raise resale value

Low cost， easy to install and retrofit to existing and older homes

DIY or contractor installed， 1 operator can easily apply 1000 sq. ft./hours

Lowest emissivity in the industry (reflects the most heat)

Lo/MIT-II e=0.17

Independently tested

Full 5.0 Gal. pail covers approximately. 2，000 sq. ft.

Excellent shelf life: re-usable after opening up to 1-year from DOM

1 coat application， easily spray or roller applied

1 component system， no primer needed， cleanup with soap and water

Water-based， low VOC formulation

Safely applied in enclosed spaces

Class A fire rated， RIMA-I certified for energy efficiency

Conforms to ASTM standard #C1321 for interior radiation control coating systems (IRCCS)

Moisture permeable， mold resistant， electrically non-conductive

Unaffected by rodents， birds and insects

Will not damage roof shingles or void shingle warranty