11.5 square feet， 25 pieces per case. Case weight is 53.75 lbs.

Grade 1， first-quality porcelain tile for floor and wall use.

8.63 in. width x 9.88 in. length x 0.39 in. thick

Glazed smooth finish with a low sheen and substantial variation in tone

P.E.I. Rating III is suitable for medium-duty residential floors including kitchens， halls， corridors， balconies， terraces and areas used more often with normal footwear and small amounts of dirt

Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and is frost resistant

C.O.F. greater than .60 to .79 is required for commercial applications to meet or exceed ADA (Americans with Disabilities Act) Guidelines. Skid resistant. Indoor and Outdoor use

Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength

Residential use only

Don't forget your coordinating trim pieces， grout， backerboard， thinset， and installation tools

All online orders for this item ship via parcel ground and may arrive in multiple boxes

It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns

Each line item within an order will be selected from a single dye lot (color) and caliber (size)， but multiple orders can result in receiving multiple dye lots and/or calibers. Please ensure that all tile for a project is obtained within one order

All ceramic / porcelain and natural stone tile within coordinating series may be produced at different times which can cause variation in dye lot (color) and caliber (size) which is authentic to tile

Before you begin an installation， familiarize yourself with cost factors. The Project Cost Guide can assist you in budgeting for your tile project. Visit www..com/c/cost_install_tile

Before you begin an installation， familiarize yourself with cost factors. can assist you in budgeting for your tile project.