The Triplett POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class， power source， polarity， voltage， current， power， and whether it is End Span (1/2， 3/6)， Midspan (4/5， 7/8)， or across all 4 pairs. If you are a VoIP phone and IP camera installer， you will know if there is power and a data pair available for your equipment. There is a test mode that can determine if a standard PoE (36-Volt to 60-Volt) or non-standard (11-Volt to 60-Volt) passive PoE is being used. For inline power level monitoring the display alternates between Voltage， Current and Power and incorporates a step button for selecting specific data to display. No batteries required， uses system power when connected to a device.

4 LEDs indicate IEEE802.3af or 802.3at/bt standard

Dual 7-digit LEDs indicate power source either end (A) span (1/2， 3/6) or mid (B) span (4/5， 7/8) or both for bt

Determines standard PoE or non-standard passive PoE

2 yellow LEDs indicate reversed polarity for power type

Display alternates between voltage， current and power with a step button for selecting specific data to display